Who Repairs Sliding Patio Doors?
Sliding glass doors are a desirable feature to include in your home. They provide more ventilation and natural light while also improving the overall appearance of your living space.
It is crucial to keep your sliding door in good condition through regular cleaning and lubrication. However, if your sliding door is experiencing issues it is recommended to leave this project to the professionals.
Glass Replacement
Sliding glass door are a wonderful addition to any home. They provide a fantastic view of your backyard and let light enter your living space. In time, they will begin to show signs that they are worn out. They could become difficult to slide or even break. It is crucial to fix your sliding door as fast as you can when you notice any problems. If you require the rollers of your sliding patio door repaired or replaced with glass, your local handyman can assist.
Replacing the glass on your sliding patio doors is an simple task. To accomplish the task properly you'll require the proper tools and directions. Before you begin, be certain to clear all plants and debris from the area where you will be working. This will ensure that you don't break or scratch any of the glass.
Depending on the kind of patio door you have it is important to select the appropriate kind of replacement glass. There are a range of different glass options, including double-pane windows, which offer increased energy efficiency and enhanced privacy. You can also select decorative glass options that will complement your existing style.
In some cases you may just need to replace the glass panes of your sliding patio door. For example, if you have dual panes of glass insulated units (IGU's), and there is moisture between the two panes of glass, this means that the seals are likely worn out or damaged. In this case the two panes of glass will need to be replaced to ensure proper seal.
Be aware that replacing just one glass panel on your sliding patio door is a distinct task than replacing the entire door. The frame and rollers work together to make the sliding door functional. They must be removed and reinstalled with care to ensure the new glass is installed correctly. It is possible that your patio door will become unbalanced or loose in the event that you install a brand new pane of glass without first reinstalling the frame or rollers.
Roller Replacement
If your sliding patio doors are squeaking or not closing and opening smoothly, you may need to replace the rollers. After years of heavy use, the rollers may become clogged with dirt and grime and stop moving smoothly. A little lubrication may help, but if it doesn't, you'll need to replace the rollers.
To remove the old rollers, start by unscrewing the screws which hold them in place. You'll need to unscrew both sides of the door. Once the rollers have been removed, you can take them from the door. Save the screws so that you can replace the rollers later.
You can buy replacement sliding door rollers at hardware stores or lumberyards. They are cheap and easy to install. Choose a steel ball bearing roller that is sized to the dimensions of your door, or a tandem wheel for doors with large openings. You may want to consider using nylon rollers instead of steel when you have aluminum siding.
Clean the track prior to installing the new rollers. Apply a thin layer oil to the tracks, rollers and guide rails with a spray can that has a low-odor or lithium grease spray. A silicone lubricant will work better than petroleum-based lubricant because it won't draw dirt or grime.
Sliding patio door systems are a major part of the home and when there's a problem with the rollers, or they get stuck, it can create a serious security hazard. By swiftly addressing worn or hurt rollers, you can ensure that your sliding patio doors are operating perfectly for their long life duration.
Weatherstripping Replacement
The seals on a sliding patio door might appear to be tight at first but they gradually weaken over time, allowing light, drafts and bad weather. It's time to replace your weather stripping if need to raise the thermostat in order for you to avoid an unpleasant draft, or if you notice condensation in between glass panes. It's not necessary to engage a professional to do the job - you can install it yourself in minutes if you choose the right kind of weatherstripping.
To begin, look for gaps at the top and bottom of your patio doors, where they meet their frames. Bob Vila says that a small gap can allow a lot of air to pass between your home and the outside, increasing the cost of energy by as much as 10%. It is also important to examine the weatherstripping to determine whether it is damaged such as broken pieces or cracks that let cold air in and dust.
The most commonly used type of weatherstripping for sliding patio doors is called fin-seal. It's a strip made of Mylar with bristles that can bend in a variety of directions in response to the movement of your door. It's available in a range of lengths to suit different doors and windows, and it can be purchased through the internet or at numerous home improvement stores. You'll require a screwdriver, a hammer, hooks and picks, as well as a putty knife to install it.
If your doors are old, you may also need a lock cylinder tool. After loosening screws, you will have to lift the doors off of the track. (Get assistance if you need it) and place them on a pair sawhorses. Remove the headstop and any screws that hold the door in place.
Once the door is removed, scrape off any remaining old weatherstripping using your putty knife. Cut a new piece of weatherstripping using a utility blade, leaving a little extra to be used for future repairs. Install the seals on the frame of your new patio prior to reinstalling it.
Frame Replacement
Sometimes, the frame of your sliding patio door could need to be replaced, as it can get warped or discolored as time passes. This can be a simple repair or you might require the frame to be replaced for a larger glass area or to accommodate a different type of sliding patio door. Whether you need to replace or repair the existing frame you'll need to make sure to choose an attractive and durable option. The sliding patio door frames are offered in a maintenance-free white color, as well as a tan that is primed for staining or painting to match your home's exterior.
A common problem with sliding patio doors is the frame of the screen getting bent or damaged. If this is the case, you'll need to find an entirely new frame for your screen that is the same size as your existing patio door. There are patio door lock repair of screen door frames that you can purchase that include extruded and roll-formed designs. Extruded screen door frames is more costly, but it is stronger and has more durability than a roll-formed screen door.
The rollers for sliding screens may also wear out over time. This could cause the door to stick or even jam. These can be easily replaced with new rollers from a hardware store. Also, you should look over the rollers to determine whether you have to replace them.
Replace the frame on your sliding patio door to improve its appearance or improve its the efficiency of your energy usage. This is a more cost-effective solution than simply replacing the glass or doors. It is important to determine the width and height of the opening prior to when you replace the door. This will help ensure that you select the appropriate replacement. You'll also want to ensure that the frame is square and level before installing it. You can use a spirit-level to verify this. Install the new door and frame following the manufacturer's instructions and the materials.